Cruise Control
Cruise control can be retrofitted to all Corsa D vehicles regardless of specification or engine.
The amount of work required to fit it can vary dependant upon what engine you have.
A single wire may need to be added between the stalk and the BCM, see below for more information
Missing Wiring Check
If you fit the stalk and find that the plug is there to connect onto the cruise stalk, but cruise control still does not work, you may be missing a wire from the BCM to the Column Switch Module. The illustrations below show where to look for the wire. If the terminals are empty, you need to add a wire in.
Check for a wire in Pin 20
Check for a wire in pin 41