GID Display
 This guide is for the later GID screens which look like this.

This guide is for the later GID screens which look like this.

 Remove the ribbons by releasing the retainer and remove the white power connector.

Remove the ribbons by releasing the retainer and remove the white power connector.

 The circuit board can now be removed, the LEDs are PLCC6 and run across the bottom.

The circuit board can now be removed, the LEDs are PLCC6 and run across the bottom.

 PLCC6 LEDs are used on this board, it is possible to install PLCC2s, but you have to lift the LED or stop some pads connecting with the LED

PLCC6 LEDs are used on this board, it is possible to install PLCC2s, but you have to lift the LED or stop some pads connecting with the LED