Steering Wheel Controls

This guide is for the most common type of steering controls. The earlier controls disassemble in a similar way, only the LEDs are 6 No. PLCC2.

 Remove the 2 T6 Torx screws

Remove the 2 T6 Torx screws

 Remove the front cover.

Remove the front cover.

 There are some small tabs holding it together. Lift these gently and disassemble.

There are some small tabs holding it together. Lift these gently and disassemble.

 You now have the circuit board ready for the LED′s

You now have the circuit board ready for the LED′s

Be careful when removing the old LEDs, the circuit tracks are very fine and it is very easy to pull them up if the solder isn’t molten when you lift. You need to be careful not to get it too hot as well.