Technical Service Bulletin
2115 – CIM – Engine does not start, P1614, P1616, B3055
Astra-H 2004…2007,Zafira-B 2005…2007
Engine does not start, DTC P1614 / P1616 and/or B3055 set.
Software weakness of the Column Integration Module (CIM).
As of MY 2008 improved CIMs with new software have been introduced in production.
In case of customer complaint reprogram the CIM as described in TIS 2000
with TIS 2000-DVD, version 83 or higher.
Important: For a successful programming follow the instructions in TIS 2000 and set up the CIM for programming by Tech-2 before reprogram. Procedure for CIM SPS programming:
–> After selection of MY and Vehicle “Enter”
–> Body “Enter”
–> CIM “Enter”
–> Additional Funktions “Enter”
–> SPS programming set up “Enter” – CIM SPS programming will be performed
Afterwards carry out the CIM SPS programming (Old software version:
M: –.57; New software version: M: –.62).
Important: During the CIM set up ignore all “switch off ignition” messages, otherwise the programming of the CIM won´t be successful.
Note: Vehicles with PEPS are not affected and therefore it is not possible to program a CIM with PEPS.